Core-Sheath Heterogeneous Interlocked Conductive Fiber Enables Smart Textile for Personalized Healthcare and Thermal Management.

Whereas thermal comfort and healthcare management during long-term wear are essentially required for wearable system, simultaneously achieving them remains challenge. Herein, a highly comfortable and breathable smart textile for personal healthcare and thermal management is developed, via assembling stimuli-responsive core-sheath dual network that silver nanowires(AgNWs) core interlocked graphene sheath induced by MXene. Small MXene nanosheets with abundant groups is proposed as a novel "dispersant" to graphene according to "like dissolves like" theory, while simultaneously acting as "cross-linker" between AgNWs and graphene networks by filling the voids between them. The core-sheath heterogeneous interlocked conductive fiber induced by MXene "cross-linking" exhibits a reliable response to various mechanical/electrical/light stimuli, even under large mechanical deformations(100%). The core-sheath conductive fiber-enabled smart textile can adapt to movements of human body seamlessly, and convert these mechanical deformations into character signals for accurate healthcare monitoring with rapid response(440 ms). Moreover, smart textile with excellent Joule heating and photothermal effect exhibits instant thermal energy harvesting/storage during the stimuli-response process, which can be developed as self-powered thermal management and dynamic camouflage when integrated with phase change and thermochromic layer. The smart fibers/textiles with core-sheath heterogeneous interlocked structures hold great promise in personalized healthcare and thermal management.

Biomimetic Hierarchically Silver Nanowire Interwoven MXene Mesh for Flexible Transparent Electrodes and Invisible Camouflage Electronics.

Flexible transparent electrodes demand high transparency, low sheet resistance, as well as excellent mechanical flexibility simultaneously, however they still remain to be a great challenge due to"trade-off" effect. Herein, inspired by a hollow interconnected leaf vein, we developed robust transparent conductive mesh with biomimetic interwoven structure via hierarchically self-assembles silver nanowires interwoven metal carbide/nitride (MXene) sheets along directional microfibers. Strong interfacial interactions between plant fibers and conductive units facilitate hierarchically interwoven conductive mesh constructed orderly on flexible and lightweight veins while maintaining high transparency, effectively avoiding the trade-off effect between optoelectronic properties. The flexible transparent electrodes exhibit sheet resistance of 0.5 Ω sq-1 and transparency of 81.6%, with a remarkably high figure of merit of 3523. In addition, invisible camouflage sensors are further successfully developed as a proof of concept that could monitor human body motion signals in an imperceptible state. The flexible transparent conductive mesh holds great potential in high-performance wearable optoelectronics and camouflage electronics.

Smart Textile Based on 3D Stretchable Silver Nanowires/MXene Conductive Networks for Personal Healthcare and Thermal Management.

Wearable electronics have enriched daily lives by providing smart functions as well as monitoring body health conditions. However, the realization of wearable electronics with personal healthcare and thermal comfort management of the human body is still a great challenge. Furthermore, manufacturing such on-skin wearable electronics on traditional thin-film substrates results in limited gas permeability and inflammation. Herein, we proposed a personal healthcare and thermal management smart textile with a three-dimensional (3D) interconnected conductive network, formed by silver nanowires (AgNWs) bridging lamellar structured transition-metal carbide/carbonitride (MXene) nanosheets deposited on nonwoven fabrics. Benefiting from the interconnected conductive network synergistic effect of one-dimensional (1D) AgNWs bridging two-dimensional (2D) MXene, the strain sensor exhibits excellent durability (>1500 stretching cycles) and high sensitivity (gauge factor (GF) = 1085) with a wide strain range limit (∼100%), and the details of human body activities can be accurately recognized and monitored. Moreover, thanks to the excellent Joule heating and photothermal effect endowed by AgNWs and MXene, the multifunctional smart textile with direct temperature visualization and solar-powered temperature regulation functions was successfully developed, after further combination of thermochromic and phase-change functional layers, respectively. The smart textiles with a stretchable AgNW-MXene 3D conductive network hold great promise for next-generation personal healthcare and thermal management wearable systems.

Fabrication of P(AN-MA)/rGO-g-PAO Superhydrophilic Nanofiber Membrane for Removal of Heavy Metal Ions.

The process in which the nanofiber membrane is used to remove heavy metal ions and separation of oil-water solution is analyzed. Herein, smooth structures are induced by rGO-g-PAO sheets, which could be attributed to the strong interaction between P(AN-MA) and rGO-g-PAO. It is rewarding to note that the P(AN-MA)/rGO-g-PAO nanofiber membrane would exhibit superhydrophilic traits in the air and ultra-low oil-adhesive traits underwater when the concentration of P(AN-MA) and PAO is 13 wt.% and 0.3 wt.%, respectively. The amidoxime (-C(NH2) NOH) groups on the membrane surface can efficiently adsorb copper (Cu(II)) (1.65 mmol/g) and chromium (Cr(VI)) (4.70 mmol/g) ions in the waste water. Meanwhile, the P(AN-MA)/rGO-g-PAO nanofiber membrane exhibits ultrahigh flux (~6150 LMH), satisfying rejection rate (~97%) and outstanding flux recovery ratio (~99%) in separating oil water emulsion.

Bio-inspired robust superhydrophobic-superoleophilic polyphenylene sulfide membrane for efficient oil/water separation under highly acidic or alkaline conditions.

The separation of water-in-oil emulsions in harsh environment (strong acid/alkali) is a challenging subject. In this study, we prepared a superhydrophobic-superoleophilic polyphenylene sulfide (PPS) membrane by the mixture of hydrophobic SiO2 nanoparticles, diphenyl ketone (DPK), benzoin (BZ) and PPS via thermally induced phase separation (TIPS) technology. This superhydrophobic membrane displayed a lotus leaf-like micro-nano structure, and it could be used for oil/water separation in strong acidic or alkaline environment. The hydrophobic SiO2 nanoparticles played a key role in the membrane structure evolution and its performance. When SiO2 content was 4 wt%, the pure water contact angle of the prepared superhydrophobic-superoleophilic membrane reached 156.9° and the oil contact angle achieved 0°. The fluxes of water-in-oil emulsions (kerosene, toluene and chloroform) reached 1926, 3150 and 3416 L/(m2·h), respectively. However, the fluxes of their surfactant-stabilized water-in-oil emulsions declined to 531, 685 and 724 L/(m2·h), respectively, due to the great stability of surfactant-stabilized emulsions. Most importantly, all the water rejection rates exceeded 99.9% when the PPS membranes modified with 4 wt% hydrophobic SiO2 nanoparticles. In addition, the PPS-SiO2 hybrid membranes exhibited excellent self-cleaning antifouling performance, cycling performance and superior acid/alkali resistance.

Biodegradable Transparent Substrate Based on Edible Starch-Chitosan Embedded with Nature-Inspired Three-Dimensionally Interconnected Conductive Nanocomposites for Wearable Green Electronics.

Electronic waste (E-waste) contain large environmental contaminants such as toxic heavy metals and hazardous chemicals. These contaminants would migrate into drinking water or food chains and pose a serious threat to environment and human health. Biodegradable green electronics has great potential to address the issue of E-waste. Here, we report on a novel biodegradable and flexible transparent electrode, integrating three-dimensionally (3D) interconnected conductive nanocomposites into edible starch-chitosan-based substrates. Starch and chitosan are extracted from abundant and inexpensive potato and crab shells, respectively. Nacre-inspired interface designs are introduced to construct a 3D interconnected single wall carbon nanotube (SCNT)-pristine graphene (PG)-conductive polymer network architecture. The inorganic one-dimensional SCNT and two-dimensional PG sheets are tightly cross-linked together at the junction interface by long organic conductive poly(3,4-ethylenedioxythiophene) (PEDOT) chains. The formation of a 3D continuous SCNT-PG-PEDOT conductive network leads to not only a low sheet resistance but also a superior flexibility. The flexible transparent electrode possesses an excellent optoelectronic performance: typically, a sheet resistance of 46 Ω/sq with a transmittance of 83.5% at a typical wavelength of 550 nm. The sheet resistance of the electrode slightly increased less than 3% even after hundreds of bending cycles. The lightweight flexible and biocompatible transparent electrode could conform to skin topography or any other arbitrary surface naturally. The edible starch-chitosan substrate-based transparent electrodes could be biodegraded in lysozyme solution rapidly at room temperature without producing any toxic residues. SCNT-PG-PEDOT can be recycled via a membrane process for further fabrication of conductive and reinforcement composites. This high-performance biodegradable transparent electrode is a promising material for next-generation wearable green optoelectronics, transient electronics, and edible electronics.

MnO2/MWCNTs Nanocomposites as Highly Efficient Catalyst for Indoor Formaldehyde Removal.

Formaldehyde (HCHO) is a main indoor pollutant that is capable of harming the health of residents. Here, we fabricated a novel MnO2/MWCNTs nanocomposite film for non-photocatalytic, room temperature removal of indoor HCHO. MnO2/MWCNTs nanocomposites with various amounts of a-MWCNTs, which were fabricated by a co-precipitation method, were assembled into composite films using vacuum filtration and solvent evaporation. Structural analysis confirms that MnO2 nanoparticles are homogeneously distributed on a-MWCNTs. The acetyl acetone method was used to characterize the catalytic activity of MnO2/MWCNTs nanocomposites. The results show that MnO2/MWCNTs composites with 30 wt% a-MWCNTs present the highest catalytic activity due to a highly active surface. The catalytic activity of MnO2/MWCNTs composite film was characterized in a glovebox at room temperature and showed good removal of HCHO. This study suggests that supporting catalysts on MWCNTs and then assembling them into fibers (1D), films (2D) or aerogels (3D) is a worthwhile approach to promote catalytic activity and prevent dust pollution.

Mussel-Inspired Polydopamine-Functionalized Graphene as a Conductive Adhesion Promoter and Protective Layer for Silver Nanowire Transparent Electrodes.

For the scalable fabrication of transparent electrodes and optoelectronic devices, excellent adhesion between the conductive films and the substrates is essential. In this work, a novel mussel-inspired polydopamine-functionalized graphene/silver nanowire hybrid nanomaterial for transparent electrodes was fabricated in a facile manner. Graphene oxide (GO) was functionalized and reduced by polydopamine while remaining stable in water without precipitation. It is shown that the polydopamine-functionalized GO (PFGO) film adhered to the substrate much more easily and more uniformly than the GO film. The PFGO film had a sheet resistance of ∼3.46 × 10(8) Ω/sq and a transparency of 78.2%, with excellent thermal and chemical stability; these characteristics are appropriate for antistatic coatings. Further reduced PFGO (RPFGO) as a conductive adhesion promoter and protective layer for the Ag nanowire (AgNW) significantly enhanced the adhesion force between AgNW networks and the substrate. The RPFGO-AgNW electrode was found to have a sheet resistance of 63 Ω/sq and a transparency of 70.5%. Moreover, the long-term stability of the RPFGO-AgNW electrode was greatly enhanced via the effective protection of the AgNW by RPFGO. These solution-processed antistatic coatings and electrodes have tremendous potential in the applications of optoelectronic devices as a result of their low production cost and facile processing.